BASE PRICE : $28,771

Effective June 2020

Odyssey Floorplan


Dry Weight: 1,900 Pounds
Closed Body Height: 67"
Interior Height - Open: 76"
Interior Height - Closed: 57"
Exterior Width: 80"
Overall Length: 165"
Floor Length: 87"
Floor Width: 80"
Center of Gravity (Measures front to back)
Cabover Bed Size: 60 x 80
Mattress to Roof Height - Open: 25"
Mattress to Roof Height - Closed: 5"
Fresh Water Tank: 20 Gallons
Cassette Fresh Tank: Feeds off Fresh Tank
Cassette Black Tank: 4.75 Gallons

Standard Equipment

  • 4 Post Electric Roof Lift System
  • 4 Corner Exterior Mechanical Jacks
  • 3.1 CuFt 12v Compressor Fridge
  • 25-Amp Converter
  • MaxxAir Roof Fan
  • ALL LED Lighting
  • Zamp Portable Solar Connection
  • 12v & USB Outlets
  • Volt Meter
  • GFCI Protected Outlet
  • 30-Amp Power Cord with Adapter
  • 7-Way RV Plug
  • Single Stainless Steel Sink
  • Truma Combi Eco Water Heater/Furnace
  • Swivel Cassette Toilet
  • Pressurized Water System
  • 23-Gallon Fresh Water Tank
  • Exterior Shower / Docking Station with 15' Coil Hose & Hand Sprayer
  • Gravity Water Fill
  • 2 Burner Stove
  • 20-Pound Upright LP Tank with Regulator
  • Aluminum Siding
  • Fiberglass Nose
  • North/South Cabover
  • Insulated Windows
  • Memory Foam Queen Size Mattress
  • Lift-Up Under Bed Storage
  • Folding Entry Door Assist Handle
  • Entrance Door With Screen, Deadbolt & Tinted Window
  • Locking Exterior Storage
  • G27 Led/Acid Battery with Tray
  • Bunk Ladder

Available Build Option Upgrades

(These items must be on the order when placed)

Description LBS Price
1 Glass Top Sink (11) $160
4 Lague Table Leg (4) $270
5 Overhead Cabinets with Netting (36) $290
7 Insulated Skylight - $260
8 Lithium Charging Converter (1) $175
9 3K Watt Inverter with Switch (20) $870
11 Roof Air Conditioner (90) $1,015
12 170-Watt Roof Solar Package (25) $757
13 340-Watt Roof Solar Package (50) $1,375
14 Pre-wire Exterior Electric lacks (7) $160
15 Wireless Exterior Electric lacks (31) $1,040
16 Dual G27 Led/Acid Batteries (55) $350
19 Factory Prep W Tray Tiedown setup (includes Torklift Fatguns) - $1,000

Anytime Accessories

(These items can be added during or alter completion)

Description LBS Price
A Glass Top Stove Cover (3) $40
B Reflective Tent Panels (5) $525
D USB Flex TV Antenna (1) $90
E TV Mount with 12v Hook-Up (3) $135
G 16x16x10 Exterior Aluminum Box (11) $460
H Exterior Privacy / Shower Enclosure (14) $420
I TaxTab with Aluminum Brackets (27) $560
J 2 Bar Roof Rack with Rear Ladder (23) $445
K 3 Bar Roof Rack with Rear Ladder (31) $610
L Single RotoPax Mount (4) $40
M 3-Step Adjustable EasyHitch Step (29) $409
N 4-Step Torklift Glow Scissor Step (25) $350
O 5-Step Torklift Glow Scissor Step (31) $404
P 6′ 6″ F65 Fiamma Eagle Manual Awning (33) $970
Q 8′ Carefree Crank-Out Awning (49) $1,020
R 8′ BunduHalf 90-Degree Awning (42) $1,390
S 8′ BunduEl 270-Degree Awning (49) $1,540


Do I need additional insurance for my truck camper?

Most states do not require separate RV insurance since the truck camper is considered part of the truck itself, and can be an addition to the policy. Be sure to check you state laws.

What about registration and title?

At present, eight states require the slide-in truck camper to be registered with their motor vehicle department; Idaho, Mississippi, Nebraska, Oregon, Rhode Island, Tennessee, Utah, and Washington.

The states that require you to title your truck camper differs, in some cases, from the states that require registration. At present, there are eleven states that require you to title your truck camper. Every slide-in truck camper manufacturer will create a Certificate of Origin when they build a truck camper. The camper’s VIN or an equivalent identification number will be on this form. This will be signed over to you when you purchase your truck camper. This certificate is used just like a title if you ever decide to sell your truck camper. States that require a title; Idaho, Kentucky, Michigan, Mississippi, Montana, Nevada, Ohio, Oregon, Tennessee, Washington, and Wisconsin.

How are taxes handled?

Being in Iowa, we are an Iowa Business, which means that we are required to charge Iowa sales tax (7%) when a sale is made within Iowa's state as the state considers this an in-state purchase.

Do you do custom orders?

Yes! Your camper should be tailored to you, and sometimes a cookie cutter camper just doesn’t fit your needs. We will work with you to make sure you are as excited about going on new adventures as we are!

How do we order a camper?

We are a factory direct business so there are no hoops to jump through. Give us an email with what you are looking for along with what options you think you’d like, and then one of us will contact you to start the process of ordering.

Do you make flatbed campers?

Yes we do!

How do I store my truck camper?

How you store it is completely up to you, as long as there is a level area with a hard surface to place the camper jacks. Storage solutions range from using dollies, cinder blocks, saw horses and other support structures. Many just put the camper low to the ground, with no underbelly support. Others keep the camper on the truck. It depends on your personal preference.

Can I still tow a boat when using a truck camper?

Yes you can. Using a truck camper usually does not cover the hitch. Just remember to have a Y plug to power both the camper and the tow.

Do you offer a cold weather package for the campers?

For our Pop Top campers, we have an option called Arctic Pack Insulation Panels.

What is the difference between Happi Jac and Torklift tie downs?

Happi Jac is a “bed mount” tiedown, which means it has a steel plate mounted to the front of the box and a button on the bumper for attachments points for your camper. These are less expensive but there is the possibility it could damage the box or rear bumper of your truck.

Torklift are “frame mount” tiedowns that are steel bars mounted to the frame in the front of the truck and to the frame or hitch at the rear for attachment points.  These are a little more expensive but are stronger and more stable. It allows for little to no movement for the camper in the truck bed. You can also pull a pin and remove the extensions so it has no exposed pieces when the camper is off the truck.

Can we tour your factory?

Yes you can, we love meeting our clients and showing them around! Give us a call and we can schedule a tour in for you.

How do we get our camper shipped to us?

We are a factory direct business, which means we do not use dealers or ship out any of our campers. We do this to make sure the installation is done properly and to give a tour of your camper. We wouldn’t want you to miss out on any instructions or demonstrations we need to do during the installation. It also keeps cost down a little bit more.

How much weight can my truck safely haul?

Cargo capacity or GVWR can be found on the driver’s side door or may be listed in the glove box.  The cargo capacity is the weight you can haul. The GVWR is the total weight, so you will have to subtract the weight of the truck from the GVWR and that will give you the cargo capacity.  The weight listed on the camper is with the water tank and LP full. If it says “Dry Weight”, that is the weight without water or LP. Everything being carried in your truck should be below the truck’s rated cargo capacity. This includes all passengers, gear, and your fully loaded truck camper.

Deposits & Payment

Our payment process is broke down into 3. The initial 30% deposit is non-refundable like most of our competitors. This deposit covers the administrative duties that go into the order process and a portion of the time and misc. things needed to plan for it to come down the production line. The second payment is also 30%, and is due when the unit starts production, this deposit is also non-refundable as now the unit is in production. The final payment would be due when you arrive to pick up the unit once complete.


There is a one (1) year warranty valid from the original date of purchase (ODT) that includes, but is not limited to, the following items: Structural integrity of sidewalls, framework, roof lift system, and laminated roof structure.

Items NOT included I the BundutecUSA manufacturer’s warranty, but are not limited to: cosmetic blemishes or other non-structural defect; any defect caused by misuse, abuse or repairs outside a pre-approved facility, damage due to freezing, flooding, fire or environmental factors; normal deterioration of fabric or other items due to normal wear and tear, items used for commercial purpose or held for rental, products or devices that were installed after the manufacturer completion date, products that do not meet the ANS1119.2 standards. All internal appliances are manufactured through the original manufacturer and not covered by BundutecUSA.

Warranty will not apply if identifying tags and names are removed or altered.